Snowman Box

Here is an easy gift box and tag made using Wrap it Up.

The box is cut out at 11.50" The boxes on this cartridge are super easy to put together. 

The snowflake tag is cut out at 4" Then a white paper glued and cut out behind it and stamped with peachy keen snowman face. 

Punched a hole in the little flap of the box to tie the tag to the box.

Super Easy and what a great little box to give to co-workers or neighbors filled with a little treat.

Happy Creating

Happy Holidays Card

Getting a jump start on my Holiday cards already.  Here is a easy fun Holiday card that was made using Winter Frolic and Wrap it up.  The overall size of the card is 4 x 6

The Gingerbread house is from Winter Frolic and is 3.5" The gingerbread house does have a lot of little parts, at 3.5" though it wasn't to bad, just a couple little circles that were so so small so I didn't put them on, but you wouldn't want to go to much smaller with this house if you wanted to be able to use all the pieces. Then I used sickles for the snow on the roof to give it that little extra.

 The Happy Holidays is from Wrap it up and it's cut out at 2"

 

Happy Creating

Treat Boxes and Cards

For this little treat boxes and cards I used the wrap it up cartridge.  I wanted to make them small, so they would be more of a little thank you treat and a small card.  Thats why they are so litte.  

The cut dimensions of these are as follows

Treat Boxes are 5.25", when they are folded and glued together they are approximatly 3.5" x 5.5" 

Cards are 2.75" when they are folded and they are 2.75" x 2.75" 

These would also be great making them full size.

Happy Creating

Smell My Feet

This is a fun Halloween Card I made using the Wrap it up Cartridge, the funny thing is I hate feet. But loved his witch.  The image is for the card feature so it's all hooked together.  Then you have to add the layers of course.  The dimensions of this card is 5 x 7 and the image is cut out at 3.7"  I did use purple sickles to make spots on her dress.

Super easy and fun

Happy Creating

Halloween Bag

Here is a fun Halloween Treat bag, I made for one of my favorite neighbors, I made this bag using the Wrap it Up Cartridge, this cartridge has so many fun bag and boxes and tags on it.  The box is cut out at 9.71" which is the largest I could get it to fit on my Gypsy using a 12 x 12 sheet of paper.  Then I cut the pumpkin out at 3.12" with all his layers.  The tag is 2.18" I did cut off the bottom end to make it round, so it could hang from the box, and the Happy Halloween is cut out at 1.50".  It didn't take very long to make about an hour, but if you needed to make a bunch it would be super easy to mass produce them and it wouldn't take very long.

Happy Creating!